PLVE Pull Back Power Chuck Fixtures
Pull Back Power Chuck Fixture is ideal for machining application on working table ,workpiece can be clamped firmly not lift up;it is suitable for heavy cutting as well as the casting and forging machining .
1.Rust-proof for Pneumatic Cylinder: Inside wall of cylinder being rustproof treated;cylinder can work under wet or high moisture circumstances without rusty or seized trouble.
2.Dusts-proof and Waterproof: Dust-proof and Waterproof structure prevents workchips and coolant water from entering into inside of chuck cylinder to maintain its accuracy and lead to longer service life.
3.Heavy Duty Clamping Design: Collocating hydraulic system to do heavy duty clamping, the chuck structure is steady and won't deform.
| MODEL /SPEC. | A | B | C | D | E | F max. | F min. | G max. | G min. | H | I | K |
| PLVE-06 | 224 | 169 | M10x1.5P(PCDφ202) | 17 | 140 | 45.65 | 35.65 | 14.65 | 4.65 | 70 | — | 35 |
| PLVE-08 | 265 | 210 | M10x1.5P(PCDφ243) | 17 | 154 | 57.15 | 47.15 | 16.15 | 6.15 | 84 | 26 | 40 |
| PLVE-10 | 315 | 254 | M12x1.75P(PCDφ285) | 20 | 185 | 67.6 | 51.6 | 21.6 | 5.6 | 100 | 32 | 50 |
| MODEL /SPEC. | M | N max. | N min. | P | Q | Piston Area(cm²) | ||||||
| PLVE-06 | φ11(PCDφ202) | 56.69 | 54.01 | 3-M6x1 P(PCD08O) | 3-M6x1P(PCD012O) | 91 | ||||||
| PLVE-08 | φ11(PCDφ243) | 69.65 | 66.88 | 3-M1Ox1.5P(PCD0136) | 3-M1Ox1.5P(PCD0186) | 160 | ||||||
| PLVE-10 | φ13(PCDφ285) | 87.44 | 81.61 | 3-M12x1.75P(PCD017O) | 3-M12x1.75P(PCD023O) | 215 | ||||||
| MODEL /SPEC. | Plunger Stroke (mm) | Jaw Stroke [Diameter] (mm) | Max. Gripping Force kgf (kN) | Max. Hydr. Pressure kgf/cm² (Mpa) | Gripping Range | |||||||
| PLVE-06 | 10 | 5.3 | 2950 | (29) | 16 | (2.2) | φ35-φ160 | |||||
| PLVE-08 | 10 | 5.3 | 4890 | (48) | 15 | (2.2) | φ40-φ210 | |||||
| PLVE-10 | 16 | 11.6 | 4990 | (49) | 16 | (2.9) | φ50-φ254 | |||||
★ Reserve the right to modify spcifications
